Ciné-Kodak
Camera
Ciné-Kodak
1926
Metal, wood and glass
Overall: 13 3/4 × 6 1/2 × 9 1/2 in. (34.9 × 16.5 × 24.1 cm)
DescriptionBlack, rectangular, 16mm, hand-crank, motion picture camera with f1.9 lens, eye level view finder, wasit level view finder and modified with electric A.C. motor drive. The camera accepts 100 foot spools.
Inscriptions Engraved in silver on product plate on front of camera: CINE-KODAK MADE IN U.S.A. BY EASTMAN KODAK CO. ROCHESTER, N.Y. SERIAL NO. 19235 / Stamped in silver on product plate on front of camera: 03219 / Engraved in white on lens: 1.9, 2.8, 4, 5.6, 8, 16 / Engraved in silver on view finder switch on right side of camera: REAR, TOP / Printed in black on footage dial on back of camera: 0-100 increments FEET / Engraved in silver on footage gauge on back of camera: 4, FEET, 6, 8, 10, 12, 15, 25, 50, 100 1.2, METRES 2, 2.5, 3, 5, 10, 15, 30 / Embossed in black on door on left side of camera: EKC / Printed in black on white label behind door of camera: IMPORTANT THE FILM-TRACK IN THE GATE MUST BE KEPT CLEAN To Clean: 1. Remove gate-clamp as shown in illustration. 2. Wrap a small piece of cloth around the end of a wooden tooth-pick or match. 3. Slightly moisten the cloth and thoroughly clean the track. 4. Replace gate-clamp, being sure that it seals properly on the shaft. SEE INSTRUCTION BOOKLET FOR FURTHER INFORMATION CLEAN BEFORE LOADING EACH ROLL / Written in pencil inside of camera: FULL, EMPTY / Engraved in black on spool inside of camera: CINE-KODAK SPOOL REG. U.S. PAT. OFF. / Engraved in silver on motor on left side of camera: GE
